Pay in installments of $5.71 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 30 - Jul 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
fitline tarp Ultralight Tapered Tarp 8'/6'The Tarp Not too big, not too small. This tarp tapers in width from about 8' at the head to 6' at the foot and is offered in two lengths to better fit your needs. We think this size tarp is the sweet spot for the solo camper. Tapered shape uses space efficiently Curved ridge and edges provide a taut pitch Recycled fabric option Silpoly won't sag when the temperature drops Lower water retention than silnylon Reflective tie outs Great for partnering
The Tarp
Not too big, not too small. This tarp tapers in width from about 8' at the head to 6' at the foot and is offered in two lengths to better fit your needs. We think this size tarp is the sweet spot for the solo camper.
- Tapered shape uses space efficiently
- Curved ridge and edges provide a taut pitch
- Recycled fabric option
- Silpoly won't sag when the temperature drops
- Lower water retention than silnylon
- Reflective tie-outs
- Great for partnering with your Bug Bivy or our 1P Bug Shelter.
Tie-outs
Perimeter tie-outs are located at each end of the ridge (2), the corners (4), and the midpoints of each side (2). There are hang loops located at each end of the ridge (2), the middle of the ridge (1), and about 14" in on the ridge from each end (2) (18" on the 10' tarp).
There is an additional tie-out on the ridge about 14" in from the narrow end (18" on the 10' tarp) to allow the option to pitch with an improvised rear beak. To make the beak, move the guyline from the rear apex to the shock cord loop on the ridge tie-out. We recommend using a fastline clip (included in the optional rigging kit). Stake out the rear corners so the rear edge is pulled taut between the corners.
Note that the color of the UltraGrid reinforcements may vary from what's shown.
Seam Sealing
You'll need to seam seal the ridgeline of this tarp prior to use as per these instructions (or use our service).
Compatible with:
- Bug Bivy: Y-zip, Chest zip, Ridge zip
- Wind Bivy
- Simple Tub
- Tub-floor
- Bug Canopy
- 1P Bug Shelter
Made in the USA from imported materials.
Specifications
Fabric Options
Eco Silpoly:
- Fabric: 20D SilPoly - RECYCLED
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
- Learn more about material considerations on our Materials Page.
Membrane Silpoly:
- Fabric: 15D SilPoly
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
Weight
Eco Silpoly:
- Tarp (9' length): 10.1 oz | 287g
- Tarp (10' length): TBD
- Stuff sack: 0.3 oz | 8g
- Landfill waste: 4.4 oz (waste from in-house manufacturing)
Membrane Silpoly:
- Tarp (9' length): 7.9 oz | 223g
- Tarp (10' length): TBD
- Stuff sack: 0.2 oz | 6g
- Landfill waste: TBD
Dimensions
9' Length Option:
- Front width: 8'-0" | 2.44m
- Rear width: 6'-0" | 1.83m
- Length: 9'-0" | 2.74m
- Packed size* (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
10 ft length Option:
- Front width: 8'-2" | 2.49m
- Rear width: 6'-2" | 1.88m
- Length: 10' | 3.05m
- Packed size (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
Required items:
- These items are not included
- Trekking poles (or other support for front and rear)
- Rigging
- Stakes: 6 Minimum
- Silicone Seam Sealer
Optional Rigging Kit:
- 30 ft x 1.8mm UHMWPE core cord (0.79 oz | 22.5g)
- 7 x 10mm Tensionlock Tensioners (0.26 oz | 7.5g)
- 1 x 10mm Fastline Clip (0.12 oz | 3.5g)
- 2 x Guyline Grommets (0.19 oz | 5.5g)
Rigging
An optional rigging kit is available for those who wish to set up their tarp per our recommendations.
The kit comes with the following items:
- 30 ft of 1.8mm UHMWPE core guyline with reflective tracer
- 7 x 10mm Tensionlock guyline tensioners
- 1 x Fastline clip
- 2 x Guyline Grommets
Installation:
- Cut your guylines to the lengths shown below.
- Front corners: 40" x 2
- Rear corners: 30" x 2
- Front apex: 96" x 1
- Rear apex: 80" x 1
- Midpoints: 20" x 2
- Install the tensioners using a girth hitch (see images below). Install at all perimeter tie-outs except the rear apex
- Clip the fastline clip to the rear apex.
- Install guylines into the tensioners:
- Tie a loop in one end of each guyline. We prefer to use a bowline knot.
- Thread the guylines through the tensioners as shown in the photos below. For the two guylines that attach to the ridgeline, slip a grommet onto the guyline prior to threading it through the tensioner.
- Tie a knot in the untied end of each guyline. We use a simple overhand knot.
Girth Hitch:
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 968 reviews
Sort
Product Reviews
★★★★★ 5
Mixes matcha well
This is great for mixing matcha due to being able to adjust the speed and make it slower or faster. The stand is a great bonus.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Rechargeable hand mixed.
Blends very well and fast. Sound is very quiet. Worth the price. Recommend to friends and family. Recharges fast. Very versitatable i.e eggs, frothing and drink mixes. Good power.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 5
Worth the money.
It’s very nice. Good quality. Not cheap. Handles well. I’m very satisfied!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
One of the best genral-purpose frothers out there, period
For the longest time, I've been looking for what seems like a unicorn -- something about the size of a mini-frother, but stronger than most. Almost a mini-submersion blender, really. And I still haven't found it. But the Maestri House frothers are about the closest thing I have found, which gives me hope that my unicorn might really exist someday.
Unlike cheaper frothers that almost always warn you off from actually washing them, Maestri House makes theirs waterproof. Seriously, you can froth sloppy and get it all up in the whisk end of this, then rinse the whole thing under the faucet if you want to. I really don't recommend that for the speed ring at the top of this one, as a precaution and because it should never be necessary, but you can if you have to.
Despite what I believe is cheaping out on the battery at just 1200mAh, it really can last a while, especially if you use it just once or twice a day. That it recharges using a USB-C connector is definitely a bonus.
The speed ring at the top is great feature, overall. It turns on at a slow speed and lets you crank it all the way up to a speed that I still haven't found a good use for. This provides a lot of flexibility, from gentle mixing to full-on danger frothing.
The included whisks can all be pretty handy. The whisk-whisk is good for things like two or three whole eggs, and the frother-whisk is good for general-purpose frothing. I really haven't figured out what the hook-whisk is for, because this isn't really made for handling any kind of dough, but it might work well for medium-to-thin batters.
Generally speaking, I can easily recommend Maestri House frothers over just about any other handheld frother you're going to find. For completeness, though, there are a few things that I think could be improved upon:
- The battery. Once you're into the $25+ range, I would expect a a high-current 2000mAh battery, for longevity and torque.
- The speed ring is flexible, but depending on your dexterity and grip it can be tricky to operate when dialing in just the right speed, with just one hand. And there's no "Off" button, so you have to wind it down to "Off". For some reason I often end up spinning it the other way and making it go faster instead. Muscle memory should take over eventually, but still. A dedicated On/Off button would be handy.
- For as beefy as this device feels, it doesn't handle thick liquids as well as I expected. The torque for basic mixing and frothing tasks is more than enough, but get this into thicker liquids or even four+ eggs, and it starts to bog down.
- Like most frothers of this type, the balance of the whisks is a variable thing. If a whisk shaft gets even a little bent this thing will shake, at least when started at slow speed. Things usually settle out at higher speeds, but I'd really like to see the shaft of the whisks made thicker and more rigid so they don't bend so easily.
- The frother whisk is good for what it is, and will quickly make great, basic foam. But unless you have supreme technique, it probably won't be good for any kind of latte art. This isn't a big problem in my mind, just something to be aware of.
- The stand is okay at best, and unstable at worst. It's just a bit short for some whisks, so some of them can bottom out on the counter and make it unstable. Bending the holder at the top back just a bit with some good pliers, so the whisks are tilted up and away from the bottom, can help. I'll probably end up designing a 3D printed stand to hold this more security, as well as store the extra whisks.
- I'm really not a fan of the textured finish on this model. It feels good enough, and the color is okay, but there are obvious seams on each side that, in my opinion, take away from the aesthetic. My call would be that whatever finish might be on the body, it should be seamless around the entire cylinder.
I want to be clear, that none of the comments above are intended to warn you off of this if you're looking for a very good, well made frother. I doubt that you can find anything better! I only mention them because nothing is perfect, and to temper the reader's expectations.
This brand, if not this specific model of frother, is almost certainly everything that you are looking for. If there's anything you don't like about this particular model on paper, I urge you to consider literally any other handheld frother they make.
It only falls short compared to my unicorn device, something I don't ever expect to see from anyone else, but really believe that Maestri House could deliver if they think there's a market.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
★★★★★ 4
It is an upgrade from PRODUKT
There's a lot to like with this frother. First off, it gets super-fast. It has good power but struggles a bit through thicker liquids at high speeds. I really got it exclusively for frothing milk and making really smooth chocolate milk. For those things it works well.
I like the stand. I just keep a napkin under it so it will drip dry after rinsing. It is easy to clean because you can just run it on about medium under running water. I've been using it for about 3 weeks now, probably once every other day, and I'm still on the first charge. To me that is excellent battery life.
It spins true, even at high speed. The key is to treat it well and probably make sure to use the stand instead of laying it on the counter. Because of the high RPM, any imbalance or bend at all is really going to be exaggerated.
The only thing I am not crazy about is the control. I don't like that I have to twist it off while in the liquid. I wish there was just a switch along with the adjustment ring.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026